Equipment Cabinet/Desk AV multi-speed Cooling fans & adjustable thermostat

$28.77 (-40%)

225

  • Return shipping will be paid by: Seller
  • Country/Region of Manufacture: United States
  • Type: Audio/Video Device
  • Restocking Fee: No
  • MPN: AVCC-CAB2X80-MT
  • Condition: New
  • Item must be returned within: 30 Days
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Brand: AV Cabinet Cooling
  • All returns accepted: Returns Accepted
  • Thermostatically-Controlled Cabinet Cooling Fan System
    This cooling system is designed to be mounted in your enclosed equipment cabinet or computer desk.
    It comes with an adjustable digital thermostat, which turns the fans on and off at the temperature you set.
    In addition, YOU control the fan speed, using the multi-speed fan controller.
    The unit has 2 high-quality, low-noise 80mm fans, with long-lasting and quiet fluid dynamic bearings, integrated into a single housing.
    This system is intended to help cool:
    Home Theater Cabinets / AV Cabinets / Computer Desks /
    Receivers
    / Amplifiers / Stereos / Audio Visual Systems / Aquarium equipment
    bases / Kitchen base cabinets / Wine cooler cabinets
    .
    What’s
    Included?
    THE COOLING SYSTEM INCLUDES:
    1 x dual-80mm fan cabinet unit, 1 x adjustable thermostat, 1 x multi-speed power transformer, mounting hardware, and printed installation instructions.
    Note: In the listing pictures, the cooling systems are shown in two views: 1) against a woodgrain panel, to show how it might look when mounted in a cabinet and 2) against a colored panel, displaying the complete system.
    These panels are used for display purposes only, and are not included with the system.
    1 x dual-80mm
    cabinet fan unit
    (2 fans), with
    mounting plates
    and grills.
    The mounting
    screws are shown
    already installed.
    1 x adjustable
    thermostat, with
    a 5 foot power
    control cable.
    No batteries are
    required for this
    unit. The thermostat
    attaches to your
    cabinet using
    Velcro pads.
    1 x multi-speed
    power transformer,
    with a 4-1/2 foot
    cable. It lets
    you choose from 6
    different speeds
    for the fans.
    Features
    The cooling system has 2 high-quality, low-noise 80mm fans, with long-lasting and quiet fluid dynamic bearings.
    The mounting plate & grills seal air and make installation easy.   The fan unit is securely fastened to your cabinet by screws.
    The system includes an adjustable thermostat, which is mounted on the inside of your cabinet.  It allows you to set the temperature for the fan to come on and turn off.  This rugged thermostat does not require batteries, and will function untended for years.  The thermostat has adhesive velcro pads on the back, to make mounting in your cabinet easy.
    Also includes a multi-speed power transformer, which plugs into any 120 volt outlet.  You control the speed of the fan, using this adjustable transformer.  It can be set to any one of 6 different speeds.
    INTERNATIONAL BUYERS:
    The unit’s power transformer (supplied with the cooling system), can be switched to either 110/120 volt or 220/240 volt operation.  However, the transformer uses the standard US-style 2-prong plug.
    Contact me if you need an adapter plug (
    there is no charge
    ), and specify one of the three types:  1) NZ/AU  (2 slanted prongs) 2) Euro (2 round prongs), or UK (three large prongs).
    Even at medium speeds settings, the fans will replace a volume of air equal to that of small to medium cabinet areas several times per minute (see airflow specs below).
    All cooling system parts connect together using special heavy-duty Molex quick-connect plugs, which allows the parts to be separated for easy wire-routing.
    The standard system comes set up so that hot air enters the front of the fan unit (finished side, with mounting plate and grills), and exits out the back.
    If you need to have air coming out the front, just let me know.  There is no extra charge for this option.  You can also easily change the fan orientation later, if necessary.
    The system comes with instructions and a mounting template to facilitate installation.
    It comes completely assembled, with all components installed, wired and ready to go!
    Specifications
    Dimensions:
    The 80mm dual-fan cabinet cooling unit measures approximately 4-5/8″ high x 8″ wide, which includes the mounting plate.  The required hole is approximately 3-1/4″ high x 6-5/8″ wide.  The unit is 1-1/4″ thick behind the mounting plate, and only requires about 1/3″ additional space behind the back of the fan to allow for airflow.
    Thermostat specifications:
    The thermostat is 3″ square, and 1-1/4″ thick (from front to back) .
    It can be set from below 50F to 95F, or 10C to approx. 35C.
    Maximum current draw:
    .32 amps or 4 watts.  Normal operation (at lower speeds) will draw less current and watts.
    Bearing type:
    Super quiet, long lasting Fluid Dynamic bearings.
    The table below shows specifications for
    both of the 2 fans
    ,
    when run together,
    at several different speeds.
    The shaded area on the table indicates suggested
    fan speeds for this system.
    With cabinet cooling, slow (and quiet) are the way to go!
    Fan Speed
    Full
    3/4
    2/3
    1/2
    1/3
    1/4
    CFM (cubic feet of air per minute)
    62
    46
    40
    32
    20
    16
    DB (decibels/    noise level)
    22
    19
    16
    13
    10
    7
    Fan RPM (speed)
    2000
    1500
    1320
    1000
    660
    500
    If you would like to see this cooling system’s installation instructions, please contact me and I will supply a .PDF file with the contents.
    Payment, Shipping
    & Warranty
    Payment:
    You can pay using Paypal, or by using a major credit card, after your purchase.
    Shipping:
    Within the U.S., shipping is normally by Priority Mail.  For International shipments, I use USPS First Class International.
    Import duties, etc.:
    International Buyers
    – Please Note:
    Import duties, taxes and charges are
    not
    included
    in the item price or shipping charges. These charges are
    the buyer’s responsibility.  Please check with your country’s customs
    office to
    determine what these additional costs will be prior to bidding/buying.
    Returns:
    Within
    the first 30 days after receipt, systems which are in original
    condition can be returned for a full refund of the purchase price. 
    Please contact me for shipping address and instructions
    .
    Warranty:
    All systems are covered by a 12 months parts & labor warranty.
    YOUR SATISFACTION IS GUARANTEED!
    Custom Systems
    Please contact me if you
    have any questions, or if you want to discuss a custom cooling system
    to fit your special needs:
    Click here to ask a question
    You can also visit my Ebay store, where you will find systems designed for a number of different cooling needs:
    Click here for my store
    All text and images on this page (other than those provided by
    Ebay), copyright © 2007-2017 by DR McKenzie. Rev. 043017

    Main Menu