Return Air Filter Rack Plenum, 20 x 20 x 1" filter, duct work, hvac.

Every forced air heating and air conditioning system requires a filter of some kind to protect the equipment. This filter rack connects to the return side of the furnace or air handler. When a filter is installed in the rack, your equipment is protected from the damaging effects of large dust particles present in every home’s air. For best heating and cooling system performance change your furnace or air handler filter every 1-2 months.
This is a 20″x20″x5″ Sheet Metal return air filter rack. Made in America from American made 26 Gauge Steel Galvanized Sheet Metal . There is a 3/4″ hem flange on one 20″x20″ end
Outside the plenum (around the flange) has dimensions 21-5/8 x 21-5/8″ and height 5-1/8″
, and the other side is sealed, allowing you to custom cut to your specs. From top to bottom it is 5″ long. There is a sliding door on the 20″ side for filter access. The door can slide from ether side allowing for easy access. Filter for this plenum is 20 x 20 x 1″. Filter is not included.Although it normally takes a little more time and effort on our part, our products are typically rivited together. Riveting, versus spot welding, provides a more durable bond resulting in a longer lasting rigid part that will serve you for decades. We are a complete sheet metal shop.
Please check out my other auctions.