THERMOELECTRIC POWER GENERATION TEG MODULE – REAL HIGH TEMP not FAKE LIKE OTHERS

GENUINE HIGH TEMPERATURE TEG
UP TO 445 DEGREES F (230 C)
WITH
Teflon insulated lead wires and strain relief sleeves
This is not a low temperature TEC with polyethelyne insulation on the lead wires being sold as a fake TEG like others on eBay.
Ask the seller what the maximum temperature is and what the lead wire insulation material is. You will see! They are limited to 350 deg F (180 C).
GREEN ENERGY
CONVERTS HEAT to ELECTRICITY
Quality – Performance – Reliability From the USA
WARNING!
DON’T BE FOOLED BY CHINA SELLERS!
SOME SELLERS FROM CHINA ARE TRYING TO PASS OFF CHEAP LOW TEMPERATURE TEC (Thermoelectric Coolers) as HIGH TEMPERATURE TEG (Thermoelectric Generators).  LOOK AT THE DESCRIPTION CAREFULLY.
POWER GENERATION MODULE
Thermoelectric TEG Peltier
******
SAVE ON S/H WHEN YOU PURCHASE ADDITIONAL PIECES
******
Designed Specifically for High Temperature
POWER GENERATION
from
Thermal Enterprises
Unsurpassed
QUALITY
and
PERFORMANCE
!
US QUALITY – SHIPPED FROM THE USA
GET YOUR ITEM QUICKLY!
WE USUALLY SHIP WITHIN 2 BUSINESS DAYS
Brand New High Temperature
40mm TEG
Sealed for moisture protection
Thermal Elements formulated for optimum Seebeck (Power Generation)
Constructed for higher operating temperatures (up to 230 deg C)
Teflon insulated lead wires for higher temperature use
These modules are manufactured specifically for high temperature applications such as power generation.  Although they can also be used for cooling and/or heating applications, they are far superior than standard peltiers for power generation applications. They can be safely operated at much higher temperatures that standard peltier devices are capable of withstanding.  Each module contains 127 junctions and 254 thermal elements that are formulated for optimum Seebeck.  Unique construction includes the use of high temperature solder (238 deg C) and Teflon insulated lead wires for high temperature operation.
Standard peltier devices are typically limited to a maximum operating temperature of only 150 deg C which limits their use for power generation.  These modules can be operated at temperatures as high as 230 deg C making them ideal for power generation use.
These Devices are Known as:
TEG
TEC
Thermoelectric Generator
Ther
moelectric Cooler
Thermoelectric Module
Peltier Junction
Peltier Plate
Simply the best quality thermoelectric devices found anywhere. Take a look at our feedback to see some of the comments from our many satisfied customers!
Please Note: If you are using TEG’s or TEC’s in your product or if you use large numbers of these devices we can be of help. We offer more than 40 different models with discount pricing for large quantity purchasers. If you would like our complete product listing or a price quote for large quantity purchases please contact us with your email address.
This auction offers brand new factory fresh Laboratory Grade TEG Modules – Thermal Enterprises model HT1-12710. Each
comes with 6-inch Teflon insulated leads and are perimeter sealed with RTV Silicon for moisture protection .
These amazing can be used for power generation, cooling or heating.  Remember, always use with an appropriately sized heat sink.
Model HT1-12710
40mm x 40mm x 3.3mm
Operates from 0-16 volts DC and 0-10.5 amps
(power consumption when used as a thermoelectric cooler)
Operates from -60 deg C to +230 deg C
Each device is fully inspected and tested
Fitted with 6-inch Teflon insulated leads
Perimeter sealed for moisture protection
This is a brand new factory fresh device.
SHIPPING AND HANDLING CHARGES
First Item
Each Additional Item
All US Destinations
FREE
FREE
International – Canada
$6.99
$3.99
International – All Other
$8.99
$4.99
Important Note
Regarding Wood Stove Fans
If
your fan has a defective motor replacing the TEG module (thermo electric
generator)
will not
fix the problem.  The TEG module is the device
which converts heat to electricity.  It is sandwiched between the
upper and lower sections of the aluminum extrusions.  This allows heat to
flow from the hot base through the TEG module and to the upper fins where the
heat is then dissipated in the air flow.  These fans operate in a
high heat environment which is hard on both the motors and the TEG
modules.  Both items can and do go bad although the TEG module being
exposed to the highest temperatures is the component that fails more
often.  You can test your motor using a common household battery to
determine if it is working correctly before you conclude that the TEG module
needs replacement.
When
replacing the TEG module be sure to apply a thin layer of thermal grease on
both faces of the new TEG module prior to assembly.
This high thermal conductivity interface material is necessary to
achieve optimum performance and to extend service life.
Thermal grease is generally available at any
store that sells computers and/or computer components.
Stores like Best Buy sell thermal grease and
it can also be found online at eBay or many other sites.
Use
a straight edge to apply and spread the thermal grease across the entire
surface of the TEG.
I’ve found that
using the edge of a credit card works best.
Gently
press and rotate the TEG against the mounting surface of the top heatsink.
This will help “seat” the module with full
surface contact.
Re-wire
the new TEG module to the fan motor.
You can either solder the leads to the fan motor or splice them to the
short length of lead wire left from your old TEG module.
As you re-connect the top half of the fan
assembly (heatsink side) to the fan assembly base make sure you have remembered
to apply thermal grease to the bottom face of the TEG module.
Again, gently press and rotate to “seat” the
TEG against the mounting surface.
Be
careful not to damage the TEG during the re-assembly process.
TEG modules are strong in compression but
they are weak in shear so
do not
pinch or over-torque.
Use a bolt pattern when tightening the two
halves of the assembly together (similar to how you would mount an automobile
tire).
This will prevent pinch points
that could fracture the TEG and will result in uniform compression.
40mm TEG for POWER GENERATION